Złóż zamówienie do godziny 12:00, a wyślemy jeszcze dziś!
Kalwax 20
Kalwax 20
Kalwax 20

Kalwax 20 Impregnation Spray

zł30.00
Tax included
Protective oil spray Kalvax 20 Oil with the addition of beeswax to impregnate the benches and backs 200 ml, 600 ml package.
Available
capacity :

Rating :  

Add to Wishlist
Available

Natural Specialist oil for wood based on natural oils and beeswax - as a natural bactericidal and antifungal agent.

It restores the proper level of hydration, makes the wood elastic and prevents it from drying out. Creates a protective coating that protects against moisture and wood absorption of mineral deposits from sweat and other dirt.

Applying oil using pressure allows the wood to penetrate deeply. Suitable for use on internal surfaces such as: benches, backrests, headrests, sauna deckchairs, slab surfaces as well as walls and ceilings (for walls and ceilings, we recommend KALWAX 40).

HOW TO USE:
Apply KALWAX 20 on the cleaned element. Wait 10 minutes. Wipe off excess oil with a cloth or paper towel.
Frequency of use: depending on the intensity of using the sauna, it is recommended to use the preparation once every 1-2 months.

Easy and effective to use. The preparation in the form of SPRAY allows you to reach every corner of the sauna without having to open it.

Packaging 200 ml. Coverage: 4 - 8 m2 depending on the thickness of the applied layer.
600 ml package. Coverage: up to 29 m2 depending on the thickness of the applied layer.

Capacity 200 ml, 600 ml

HOW TO RESTORE CLEAN AND FRESHNESS IN A SAUNA:

1. Vacuum the floor, walls and benches well.
2. Grind any stains on the wood resulting from use with sandpaper and thoroughly remove the wood filings resulting from the sanding.
3. Thoroughly clean the surface under the stove, where particles of burnt stones fall out with water, which causes dusting in the entire cabin.
4. Dusted surfaces (walls, benches, floor) can be washed with a cleaning and disinfecting agent.
5. Wait until the agent dries (rinse with moderate amounts of water so as not to soak the wood too much).
6. After making sure that the sauna is well dried, apply KALWAX 20 to the benches, backrests and headrests, and KALWAX 40 to the walls and ceiling.
7. Wait 10 minutes.
8. Wipe dry with a soft cloth or paper towel the remaining preparations from the impregnated surfaces.
9. If necessary, the operation can be repeated.
10. Remember !!! Always use a towel in the sauna (it absorbs our sweat when spread on the bench, which does not cause discoloration of the wood and is hygienic). Any wood impregnation - although it increases the durability and aesthetics of the sauna - always to some extent accelerates the process of darkening the wood!

Specific References

On Top
Menu
Close
Cart
Close
Back
Account
Close